White Screen

A full-screen white or any other color for light and cleaning, plus a dead pixel and backlight bleed test

Share this tool

Report a problem

Describe the problem without including private input or files.

How useful was this tool?

How useful was this tool?

Screen color

Color presets
Custom color

Temperature and level change the color drawn on the screen, not the backlight. For more light, raise the display brightness in your device settings.

Shown color

#FFFFFF

Pick a color, then show it full screen.

Dead pixel test

Shows black, white, red, green, blue, cyan, magenta, yellow and mid gray at full level, one at a time. A dot that stays lit on black or dark on white is a stuck or dead pixel.

Your screen

As reported by the browser. Browser zoom and display scaling change these values, so set zoom to 100% first.

About White Screen

A white screen turns a monitor, laptop or phone into a flat, even light. Pick one of nine preset colors or any hex code, press the button, and the whole display fills with that color. The cursor and the small exit note fade out after two seconds without movement, so nothing but color is left on the panel.

The dead pixel test steps through black, white, the three primaries, their mixes and mid gray at full level. On black, a stuck pixel shows as a lit dot; on white, a dead pixel shows as a dark one; on red, green or blue, a stuck sub-pixel stands out in its own color. Black in a dark room also shows backlight bleed at the edges of an LCD, and mid gray shows clouding and dim corners.

The temperature slider shifts white from 2,000 K, a candle-like orange, to 10,000 K, a cold blue, with 6,500 K as pure #FFFFFF. The level slider sets the share of light each pixel gives off, so 50% gives about half the light of 100%. Neither slider changes the backlight: for more light, raise the display's own brightness. A copied link keeps the settings, so a link ending in #color=ff0000 opens the page with red selected.