Gamepad Tester
Test a PS5, PS4, Xbox, Switch or PC controller: every button, stick drift and reach, triggers and vibration
This controller does not report a known layout, so its buttons and axes are shown by number.
- Not pressed yet
- Button works
- Held now
Connect a controller and press any button.
Sticks
Left stick
- X axis
- -
- Y axis
- -
- X axis reached
- -
- Y axis reached
- -
- Distance from a circle
- Rotate the stick around its edge
Drift not checked yet
Right stick
- X axis
- -
- Y axis
- -
- X axis reached
- -
- Y axis reached
- -
- Distance from a circle
- Rotate the stick around its edge
Drift not checked yet
Rotate each stick slowly around its edge two or three times to draw the outline it reaches.
Results
- Buttons tested
- -
Not pressed yet
Last button
- Button
- -
Triggers
Pull it all the way and let go.
Pull it all the way and let go.
Vibration
This browser or controller does not report vibration, so it cannot be tested here.
Controller
- Controller name
- -
Buttons outside this layout
About Gamepad Tester
Press any button on a PS5, PS4, Xbox, Switch Pro or generic controller and the page draws it with every button lighting up as you press it, keeping the ones that worked marked so you can see what is left to test.
The drift check reads both sticks while you leave them alone for three seconds and reports the resting offset as a share of full travel: under 5% is normal, 5 to 10% is noticeable, and above 10% is drift that games read as movement.
Rotating a stick draws the outline it actually reaches, and the trigger bars record how far each trigger travels and whether it springs back to zero. Pads that report vibration can run each motor for one second.
Key Features
- Brand button labels: Xbox letters, PlayStation shapes or Nintendo letters, chosen to match the connected controller and changeable by hand.
- Stick drift check: average and largest resting offset for each stick, a plain verdict and the smallest deadzone that hides it.
- Reach and roundness: the outline each stick covers, the lowest and highest value on each axis and how far the outline sits from a circle.
- Trigger travel: live 0 to 100% bars with the highest value reached, flagged when a trigger stops short or does not return to zero.
- Vibration test: weak motor, strong motor, both together, and the trigger motors on controllers that have them.
- Up to four controllers: each connected pad gets its own tab with its id string, layout, button count and axis count.
How to Use
- Connect the controller: plug it in or pair it over Bluetooth, then press any button so the page can see it.
- Press every button: each part of the diagram turns green once it works, and the Not pressed yet list shows what is left.
- Check for drift: start the drift check, put the controller down and leave both sticks alone for three seconds.
- Rotate the sticks: move each stick slowly around its edge two or three times to draw its reach.
- Pull the triggers: squeeze each one all the way and let go, then try the vibration buttons.
Use Cases
- Suspected stick drift: put a number on it before a warranty claim or a stick module replacement.
- Buying a used controller: test every button, stick and trigger before you pay.
- After a repair: confirm a new stick module rests at center and reaches the edge in every direction.
- A game ignores a button: see whether the controller reports the press at all, and under which button number.
- Deadzone tuning: find the smallest deadzone that hides a stick's resting offset before setting it in a game.
Frequently Asked Questions
Why does my controller not show up?
Browsers only reveal a controller after one of its buttons is pressed while the page is open, so press any button. If it still does not appear, reconnect it and check that your computer or phone lists it as connected.
How do I know if my controller has stick drift?
Run the drift check and leave the sticks alone. A largest resting offset under 5% of full travel is normal, 5 to 10% can show in games with a small deadzone, and above 10% the stick moves your character or camera on its own.
What deadzone should I set in my game?
The drift check suggests the smallest whole-percent deadzone that hides the resting offset it measured, with a point to spare. Drift tends to grow as a stick wears, so check again from time to time.
Does it work with PS5, PS4, Xbox and Switch controllers?
Yes. Sony, Microsoft and Nintendo pads are recognized and get their own button labels. Other controllers work too: those with a standard layout start with Xbox labels, and the rest are shown as numbered buttons and axes.
Why is there no vibration test?
Only some browsers can run controller motors, and only for controllers that report them. Where either is missing, the vibration section says so instead of showing buttons.
Is the update rate my controller's polling rate?
No. It is a rough figure that tops out near your screen's refresh rate, so a 1000 Hz controller and a 125 Hz one can show similar numbers.
Pro Tips
- Put the controller down for the drift check: holding it can nudge a stick, and a reading taken on a table is cleaner.
- Rotate slowly: a fast spin can skip parts of the edge, so go around two or three times at an even pace.
- Compare the two sticks: when one stick rests far further off center than the other, the problem is that stick module, not the whole controller.
- Measure before and after cleaning: a drift check on each side of a cleaning tells you whether it helped.
- Test your keyboard next: the keyboard tester checks every key and how many register at once.