A portal says the file must be under 10 MB and your PDF is 31 MB. Most people press compress, wait, and hope. Spend ten seconds finding out what is inside the file first, because the fix depends on it, and the wrong one costs you either legibility or an afternoon.
Find out what is making the file big
The weight of a PDF sits in its images almost every time. A page of typed text is a few kilobytes; a scanned page or a page with a photo on it is hundreds of kilobytes or several megabytes. Divide the file size by the page count and you know which kind of file you have:
- Under about 100 KB per page: mostly text. Compression has little to remove. If the file is still too big, the problem is the number of pages, so send fewer of them.
- Roughly 300 KB to 1 MB per page: scans or pages with photos. This is the file compression was made for.
- Several MB per page: phone photos dropped straight into a PDF, or slides exported with full-size pictures. Compress first, and if that is not enough, rebuild the file from smaller images.
A 31 MB file with 12 pages is about 2.6 MB per page. That is a photo or scan problem, not a page count problem, and it tells you to skip straight to the image fixes below.
Fix 1: compress the PDF
Run the file through Compress PDF. It takes one PDF of up to 50 MB and returns a smaller copy in which photos and scans are brought down to a resolution that reads well on a screen and in an ordinary office print. Typed text stays text, so it remains sharp and searchable. If a file cannot get any smaller, what comes back is no bigger than what you sent, so trying it costs nothing.
The doubt most people have here is the signature. On a scanned page the signature is part of the page image, so it is reduced along with everything else. Before you send, open the result and zoom to 200% on the signature and any small print such as a stamp or a reference number. If those read cleanly at that zoom, they will read cleanly for the person receiving it.
Fix 2: send only the pages that were asked for
When the per-page size is small, the page count is what you have to cut. Application portals are the usual case: they ask for the signed declaration, not the whole 40-page contract that contains it. Extract PDF Pages builds a new PDF from the pages you pick, either by tapping their previews or by typing numbers such as 1, 3, 7-10. The original file is left as it was.
If the recipient really needs the whole document and it is still too big for email, cutting it into parts is the wrong answer. Gmail, for one, turns any attachment over 25 MB into a Google Drive link on its own, and a shared link is the cleaner way to send a large file anyway. Three attachments called part 1, part 2 and part 3 are easy to lose and annoying to put back together.
Fix 3: rebuild it from smaller images
A PDF made from phone photos carries every pixel of every photo. A 12-megapixel photo is 4032 x 3024 pixels. A letter-size page is 8.5 inches wide, and 1,700 pixels across that width is already 200 pixels per inch, which is more than enough for a document to read cleanly on screen and on paper. Everything above that is weight with no benefit.
- Open the photos in the image compressor. Set the maximum width and height to 1700 and 2200 for portrait pages, choose JPEG and leave the quality at 80%. The size limits only ever shrink an image, never enlarge it.
- Download each result and compare its size with the original. A photo of a paper page usually drops to a small fraction of what it was.
- Put the smaller images back together with JPG to PDF, which takes up to 20 JPG or PNG images and makes one page from each.
- Open the new PDF and check every page is there, upright and in order before you send it.
Compressing the PDF version of the same photos also works and is quicker. Rebuilding is the better choice when the compressed file is still over the limit, or when you have the original photos anyway and want control over how far each one is reduced.
A worked example: a 14-page application packet
Say a portal accepts one file of at most 10 MB, and the packet has three parts:
- A 9-page form typed and exported from a word processor: 0.4 MB, about 44 KB per page.
- A 3-page scanned transcript: 7.8 MB, about 2.6 MB per page.
- A 2-page PDF of an ID card made from two phone photos: 6.1 MB, about 3 MB per page.
Together that is 14.3 MB. The per-page numbers decide what to do with each part. The form is fine as it is; compressing it would gain almost nothing. The transcript goes through Compress PDF. The ID pages get rebuilt from the original photos on your phone, because two pages at 3 MB each mean the photos went in at full size.
Suppose the transcript comes back at 1.6 MB and the rebuilt ID pages come to 0.5 MB. Now join the three parts with Merge PDFs, which takes 2 to 10 files and lets you move each one up or down before merging, because the pages follow that order. The packet lands around 2.5 MB, well under the limit, and the typed form was never touched.
The order matters. Shrink the heavy parts one at a time and merge last. Compressing the merged packet would also work here, but it treats every page the same way, and you lose the chance to check the scan you care most about on its own.
Three habits that make PDFs bigger than they need to be
- Scanning typed documents as photos. If you have the original file, export it to PDF instead of scanning a printout: the text stays text and the file stays small.
- Scanning in color at the highest setting for a black and white page. Grayscale at a normal resolution is what a form or a letter needs.
- Turning PDF pages into images to edit them. Each page then becomes a picture of text, which is larger, cannot be searched, and cannot be copied from.
The short version: divide size by pages, compress anything that is mostly scans or photos, cut pages when the document is long but light, and rebuild from smaller images when a phone made the PDF.